Will not allow the Service LED to light for any reason.
Sounds a short beep to verify that the keypress was accepted. Enable panic, fire, emergency beep tone.Will not allow the keypad to display faulted or bypassed zones when the system is armed.
Silences the pulsing keypad sounder for 5 seconds when a key is pressed. Silences the entry/exit sounder and chime only.
Press * after enabling/disabling the desired functions. You will be presented with options, one at a time, that will enable/disable the functions for the keypad shown in the list below. Step 2 – Set keypad options (For LCD Keypads) The keypad will automatically exit the keypad programming after this You will now enter the partition you want the keypad to be assigned to. The Instant LED will illuminate steady and the Service LED will remain flashing The Service LED and the Instant LED will flash on the keypad that you are working on Step 1 – Assign keypad number and partition You will then be asked to enter location. Total Connect 2.0 Package Monitoring Add-Ons. Central Station Alarm Monitoring Services. Į.g.: look at the status of the alarm system, then open a door, then switch to view the detail view of some other device, then switch back to the alarm system, and see if it’s updated. Could you confirm if after opening/closing a door, the device status updates if you view another device then go back to the alarm system or child device (without manually hitting refresh) ?Īs far as I can tell all the updates are getting from my device to SmartThings, and logging indicates that the device status is updated correctly (which should mean that automations work), it’s just that the app doesn’t refresh properly when the device status changes.
0 kommentar(er)
